Base de conhecimento  /  Recuperação de desastres  /  SafeHaven 5 CLC para CLC
Base de conhecimento  /  Recuperação de desastres  /  SafeHaven 5 CLC para CLC

Modify WAN Replication Rate

Updated by Weiran Wang on jul 25, 2018
Código do artigo: kb/1119

Article Overview

This article explains how to Edit WAN Replication Rate for a Protection Group.

Hipóteses

This article assumes that a SafeHaven cluster has already been created successfully. Both production and recovery SRNs are registered and peered with storage pools claimed correctly. Initial replication has been started on the Windows Production Servers.

Edit WAN Replication Rate for a Protection Group

  1. Log in to the SafeHaven Console

  2. Click on a protection group, and navigate to the Properties tab.
    WAN Replication Rate is located under Replication Monitor. By default it is limited to 2048 KB/sec.

  3. To allow the Protection Group to use maximum available bandwidth, click Edit in front of 2048.
    Check the box in front of Maximum Available Bandwidth. Click Ok

Observação: The procedure is same for VMWare/Manual sites as source datacenters.

Next Step is to Check Replication Status

Powered by Translations.com GlobalLink OneLink SoftwarePowered By OneLink