Base de conhecimento  /  Nuvem privada de borda Lumen  /  Rede
Base de conhecimento  /  Nuvem privada de borda Lumen  /  Rede

Create Internet Accessible Network

Atualizado por Anthony Hakim em jul 4, 2021
Código do artigo: kb/1252

Descrição

In this KB article, we walk through how to create a new software-defined network in Lumen Private Cloud on VMware Cloud Foundation (LPC on VCF). In this particular use case, we would like to allow this network to have Outbound Internet, and will do the following:

  1. Create the Network.
  2. Create a Firewall Rule to allow Outbound Internet Access for the Network.
  3. Create a Source NAT Rule to allow Outbound Internet Access for the Network.

Etapas

Create the Network

Log in to your LPC on VCF environment.

Rede

Click Data Centers in the top menu. Then, click the Virtual Data Center summary box.

Rede

Select your Data Center. Select Networks in the left side-panel. On the Networks page, click NEW.

Rede

In the New Organization VDC Network wizard, type or select the following:

Scope: Default setting.

Rede

Network Type: Select Routed and click NEXT.

Rede

Edge Connection:

  • Select your Edge.
  • Click NEXT.

Rede

Informações Gerais:

  • Nome: Type your network name.
  • Gateway CIDR: (i.e. 10.20.30.1/24)
  • Descrição: Opcional.
  • Click NEXT.

Rede

Static IP Pools:

  • Enter an IP range (i.e. 10.20.30.50-10.20.30.200).
  • Click ADD.
  • Click NEXT.

Rede

DNS:

  • Primary DNS: (i.e., 8.8.8.8)
  • Secondary DNS: (i.e., 8.8.4.4)
  • DNS suffix: As needed.
  • Click NEXT.

Rede

Ready to Complete:

  • Review your selections and click FINISH.

Rede

Create the Firewall Rule to allow Outbound Internet Access for the Network

In LPC on VCF, under Networking, click Edges. Click your Edge (siteID-edge-0).

Rede

In the Edge Gateway - siteID-edge-0 page, select Firewall, and then click EDIT RULES.

Rede

Click NEW ON TOP. Type or select the following for the New Rule (click the pencil icons to edit):

  • Nome: Outbound 10.20.30.0 network.
  • Category: User defined (by default).
  • Fonte: Click Any Source.

Rede

  • Destino Any (by default) - varies by requirements.
  • Ação Allow.
  • Enable logging: Unchecked (by default) - varies by requirements.
  • Click SAVE.
Create a Source NAT Rule to allow Outbound Internet Access for the Network

In the Edge Gateway - siteID-edge-0 page, click NAT, and then click NEW.

Observação: You will need to make a note of the Public IP that is listed under External IP in order to create this SNAT rule.

Rede

Enter the following for the New Rule:

  • Applied On: Public-1
  • Original Source IP/Range: 10.20.30.0/24
  • Translated Source IP/Range: This is the External IP that you recorded from the note above.
  • Click KEEP.

Rede

Powered by Translations.com GlobalLink OneLink SoftwarePowered By OneLink